Product Categories
The Cobalt® BBG-1002-2UDX-DI 3G/HD/SD-SDI Standalone Dual-Channel De-interlacing Up-Down-Cross-Converter / Frame Sync offers two independent signal paths of up/down/cross conversion (including independent per-path de-interlacing) and frame sync in a single unit.
The BBG-1002-2UDX-DI provides high-density that offers unprecedented multi-input support and flexibility. Dual independent up/down/cross convert scalers are specifically designed for broadcast video formats, with full ARC control suitable for conversions to or from 4:3 and 16:9 aspect ratios. AFD processing can detect an incoming AFD code and correspondingly set scaling and ARC to track with AFD. This processor also allows independent custom ARC to be applied for each incoming AFD code, and set the desired AFD code to be inserted on the output, even if there is no code detected on the input. Bulk and per-channel audio delay controls easily address lip-sync issues.
A convenient input crosspoint can select from up to four SDI inputs to be applied to either of the unit’s two processing paths. The input crosspoint allows manual or failover to alternate inputs on loss of input conditions. With option +ANC, the BBG-1002-2UDX-DI offers full VANC/HANC ancillary data packet de-embedding and embedding.
Preset save/load allows saving custom settings while allowing one-button revert to factory settings. Layered presets allow invoking changes related only to a specific area of concern (audio routing, for example) while not changing any other processing settings or aspects. The BBG-1002-2UDX-DI can be remote-controlled using DashBoard™. GPIO allows direct input routing control and status monitoring. The compact standalone form factor allows desktop usage, as well as the 1/3-rack size of the BBG-1002-2UDX-DI allowing 3 units to be installed in a 1RU space (an optional mounting tray is available that provides secure mounting of the units to a standard 19” frame).
Key Features
Supports all popular formats: 480i, 576i, 720p, 1080i, 1080pSF, 1080p
Independent Up/Down/Cross Conversion with independent de-interlacing for each path
Multi-input RP168 clean switch, with manual selection or GPI controlled input selection. Path inputs can also be sourced from opposite path output with no external patching.
Auto-Changeover can be set to invoke failover for basic input loss.
Frame Sync with full H/V offset and manual/LOS video pattern generator. Pattern generator for each channel can provide raster/test pattern and patterns for LOS failover.
Timecode processing can prioritize, filter for, and convert between specific SMPTE embedded-video or audio LTC, with output/burn-in timecode using selected format
Advanced audio processing allows routing, gain, delay, and flexible mixing as standard features
Full audio crosspoint with delay control and 5.1-to-stereo downmix available for all audio outputs
Video options include color correction
Low-power/high-density design – less than 18 Watts
Compact footprint – up to 3 units in a 1RU space. Optional tray provides secure captive-fastener mounting of 3 units in a 1RU tray.
Remote control/monitoring via DashBoard™ software, OGCP-9000 Remote Control Panel, or Web Browser User Interface
Five-year warranty
Specifications
Note: Inputs/outputs are a function in some cases of model. See rear panel illustrations for I/O complements offered.
Power
< 18 Watts. Power supplied by 12VDC AC adapter, universal input (included).
SDI Input/Outputs
Up to (4) 75Ω BNC inputs
Up to (4) 75Ω BNC outputs (selectable as processed SDI IN or IN RCK).
SDI Formats Supported: SMPTE 259M, SMPTE 292M, SMPTE 424M
SDI Receive Cable Length: 3G/HD/SD: 120/180/320 m (Belden 1694A)
SDI Return Loss: >15 dB up to 1.485 GHz; >10 dB up to 2.970 GHz
SDI Alignment Jitter: 3G/HD/SD: < 0.3/0.2/0.2 UI
Timing Jitter 3G/HD/SD: <2.0/1.0/0.2 UI
Minimum Latency (scaler and framesync disabled):
SD: 127 pixels; 9.4 us
720p: 330 pixels; 4.45 us
1080i: 271 pixels; 3.65 us
1080p: 361 pixels; 2.43 us
Frame Sync Audio/Video Delay
Max offset: 20 frames
Latency (min): 1 frame
Option +DLY Delay (3G/HD/SD): >800 msec / >1580 msec / >9000 msec
User Audio Delay Offset from Video
Bulk delay control: -33 msec to +3000 msec.
Per-channel delay controls: -800 msec to +800 msec.
GPIO/COMM
(2) GPI configurable to select input routing. (2) GPO configurable to invoke upon input selected.
Control/Monitor Interface
Front panel network setup. DashBoard remote control via rear-panel 10/100/1000 Ethernet port.
Frame Reference Input
Looping 2-BNC connection. SMPTE 170M/318M “Black Burst”, SMPTE 274M/296M “Tri-Level”
Return Loss: >35 dB up to 5.75 MHz
Physical
Dimensions (WxHxD): 5.7 x 1.4 x 14.7 in (14.5 x 3.5 x 37.3 cm) Dimensions include connector projections.
Weight: 6 lb (2.8 kg)
Diagrams
Block Diagram
Rear Panel
The BBG-1002-2UDX-DI is available with the following rear-panel I/O configurations. These rear panel modules/layouts are not swappable.
BBG-1002-2UDX-DI-B
- 3G/HD/SD-SDI Standalone Dual-Channel De-interlacing Up-Down-Cross-Converter / Frame Sync with (4) 3G/HD/SD-SDI Input BNCs
- (4) 3G/HD/SD-SDI Output BNCs
- (1) 3G/HD/SDI Output BNC (with relay bypass failover)
- (1) GPIO/COMM RJ-45 connector
- Gigabit Ethernet
- Looping Reference and Redundant DC Power Inputs (includes one BBG-1000-PS Power Supply)
BBG-1002-2UDX-DI-C-DIN
- 3G/HD/SD-SDI Standalone Dual-Channel De-interlacing Up-Down-Cross-Converter / Frame Sync with (4) 3G/HD/SD-SDI Inputs
- (4) 3G/HD/SDI Outputs w/ (1) relay protect
- (4) AES Outputs
- GPIO/COMM (RJ-45 connector). (All coaxial connectors DIN 1.0/2.3)
- Gigabit Ethernet
- Looping Reference and Redundant DC Power Inputs (includes one BBG-1000-PS Power Supply)
BBG-1002-2UDX-DI-C-HDBNC
- 3G/HD/SD-SDI Standalone Dual-Channel De-interlacing Up-Down-Cross-Converter / Frame Sync with (4) 3G/HD/SD-SDI Inputs
- (4) 3G/HD/SDI Outputs w/ (1) relay protect
- (4) AES Outputs
- GPIO/COMM (RJ-45 connector). (All coaxial connectors HD-BNC)
- Gigabit Ethernet
- Looping Reference and Redundant DC Power Inputs (includes one BBG-1000-PS Power Supply)
BBG-1002-2UDX-DI-E-DIN
- 3G/HD/SD-SDI Standalone Dual-Channel De-interlacing Up-Down-Cross-Converter / Frame Sync with (4) 3G/HD/SD-SDI Inputs
- (4) 3G/HD/SDI Outputs
- (4) AES Outputs
- GPIO/COMM. (All coaxial connectors DIN 1.0/2.3)
- Gigabit Ethernet
- Looping Reference and Redundant DC Power Inputs (includes one BBG-1000-PS Power Supply)
BBG-1002-2UDX-DI-E-HDBNC
- 3G/HD/SD-SDI Standalone Dual-Channel De-interlacing Up-Down-Cross-Converter / Frame Sync with (4) 3G/HD/SD-SDI Inputs
- (4) 3G/HD/SDI Outputs
- (4) AES Outputs
- GPIO/COMM. (All coaxial connectors HD-BNC)
- Gigabit Ethernet
- Looping Reference and Redundant DC Power Inputs (includes one BBG-1000-PS Power Supply)
Need more products?
To expand your request to include multiple products or quantities, please visit our Request A Quote page.
