9067 Up-Converter with SD-SDI Input and Frame Sync

Tabs

Overview

(This product is discontinued. Please see 9902-UDX for its replacement.) The 9067 is a format converter specifically designed for SD-SDI to HD-SDI conversions. The card features an SD-SDI input, video processing, embedded audio crosspoint and level controls, and frame sync with video/audio offset. The upconverter allows upconversion to several HD formats, or can pass SD video without conversion.

The 9067 also provides AFD functions that detect the incoming AFD code, allow independent custom ARC to be applied for each incoming AFD code, and set the desired AFD code to be inserted on the output, even if there is no code detected on the input. Closed captions and timecode are preserved through upconversions.

Full user remote and card-edge proc control with user memory allow adjustment of gain, offset, saturation, hue, audio levels, audio routing, frame sync, and many other controls. Factory presets enable a return to factory settings.

9067 Options

Audio Mixing (+AMx)
Loudness Metering (+LM-C)
Linear Acoustic® Loudness Processing (+LP)
Linear Acoustic® Upmixing (+UM)
LTC In/Out (+LTC)

Features

SD digital input
SD closed captioning support and flexible timecode processing
Upconversion and aspect ratio conversion
AFD code insertion and AFD ARC control
User offset to frame sync to align Dolby® delay
Selectable safe action, safe title, and center cross overlays
Frame sync with up to 13 frames of user adjustable delay
Embedded audio offset adjustment for lip-sync alignment
Audio channel mapping, downmixing, and level control
16 user presets
Remote control/monitoring via Dashboard ™ software or OGCP-9000 remote control panels
Detail enhancement and noise reduction
Timecode insertion/conversion. +LTC option allows LTC input/output on shared port, with bi-directional conversion between VBI and LTC on RS-485 or any audio I/O
Five year warranty

Options

Option

COMPASS CARD OPTIONS OVERVIEW

Audio Mixer (+AMx)

Loudness Meter (+LM)

Linear Acoustic Upmixing (+UM)

Linear Acoustic Loudness Processing (+LP51, +LP20, +2LP20)

LTC In/Out (+LTC)

Diagrams

Specifications

Electrical
Power: 18 Watts

HD/SD-SDI Input
Number of Inputs: 1
Standard: SMPTE 292 and 259M
Return Loss: >15 dB at 5 MHz - 1.485 GHz

Reference Video Input
Number of Inputs: 2 looping (openGear® frame)
Standard: Tri-level sync (SMPTE 274) and
Black Burst (NTSC and PAL)

HD-SDI Output
Number of Outputs: 4 reclocked, 4 processed
Standard: SMPTE 292 and 259M
Signal Level: 800 mV nominal
Return Loss: >15 dB at 5 MHz - 270 MHz
>12 dB at 270 MHz - 1.485 GHz
Jitter: HD: < 0.15 UI
SD: < 0.10 UI
Embedded Audio: 16-Ch SD/HD

Note
This card uses a daughtercard mounted on the card right-side (viewed from front). As such, this card cannot be installed in Slot 20 of a 20-slot frame (the card must be installed in even-numbered slots 2 through 18). Please note this when fitting out a frame using this card.

Rear Module Options

Rear Modules

RM20-9067-A

   • SDI In
   • (4) Reclocked Input SDI Out
   • (4) Processed SDI Out
   (All coaxial connectors BNC)

RM20-9067-B

   • SDI In
   • (4) Reclocked Input SDI Out
   • Metadata Out/LTC In/Out RS-485
   • (4) Processed SDI Out
   (All coaxial connectors BNC)

Ordering Information

9067 Up-Converter with SD-SDI Input and Frame Sync
RM20-9067-A 20-Slot Frame Rear I/O Module (Standard Width) HD/SD-SDI Input BNC, 4 SDI Reclocked Output BNCs, 4 SDI Processed Output BNCs
RM20-9067-B 20-Slot Frame Rear I/O Module (Standard Width) HD/SD-SDI Input BNC, 4 HD/SD-SDI Reclocked Output BNCs, 4 HD/SD-SDI Processed Output BNCs,  RS-485 LTC / Metadata I/O Port

Product Downloads